Provides additional nutrition to baby, while also allowing mum and baby to continue breastfeeding.
Five soft and flexible tubes mean there's always one avanable.
Flow controller allows you to adjust the speed of milk flow.
170ml squeezable pouch has a wide opening for easy filling.
Attachment loop secures the pouch to your bra strap.
Connector & cap direct the milk smoothly into the tube while preventing leaks.
Leakproof stopper keeps milk safe inside the pouch at home or on-the-go.
Stimulates your milk supply as baby feeds at the breast.
Minimal parts to set up and disassemble.
Safe in dishwashers, sterillsers and boiling water.
BPA,PVC and phthalate-free
Description
If you and your baby are experiencing feeding issues, including latching or supply concerns, then Haakaa's Supplemental Feeding Tube & Pouch Set is the ideal way to provide extra supplemental milk quickly, easily and safely. The 170ml pouch and tube are made of non-toxic 100% food-grade silicone, and the wide pouch opening makes it easy to fill and clean. The pouch even includes a convenient attachment foop to keep it secure during feeding time, while the one-handed flow controller allows you to adjust the milk flow to suit your baby's needs. This set also includes medical tape to secure the tube to your breast and a handy storage case to keep all the smaller parts neatly tidied away!
Package includes the following:
5 x Feeding Tubes - 400 x 10 x 10mm
1 x Feeding Pouch - 117 x 108 x 44mm
1 x Pouch Cap - 43 x 38 x 24mm
1 x Pouch Stopper - 36 x 36 x 61mm
1 x Tube Connector - 35 x 34 x 26mm
1 x Flow Controller - 30 x 11 x 15mm
1 x Medical Tape - 9100 x 10mm
1 x Storage Case - 72 x 71 x 36mm
Environment Friendly - Eco-Friendly Packaging
Plastic-Free - Reusable
Ingredient Free - BPA-Free, Phthalate-Free
Material - Silicone
Material Composition - Silicone
Quantity Per Package - 1
Cautions
Always use this product with adult supervision. Only adults should attempt to feed babies from this product. Always check food temperature before feeding. Inspect before each use. Throw away at the first signs of damage or weakness. Keep components not in use out of the reach of children to avoid risk of suffocation and strangulation. Never attach to your baby or your baby's clothing using any method. The child can be strangled. This is a single-user product. Use by more than one user without adequate cleaning may present a health risk and should be avoided. It's not recommended to use non-original accessories. Continuous and prolonged sucking of fluids will cause tooth decay. Take care when inserting the tube ,nto the flow controller to avoid tearing. We recommend replacing the feeding tube regularly. To avoid risk of choking, ensure tube is well secured with provided medical tape to prevent baby dislodging it. This product should orily be used under the advice of a lactation professional. Always consult a medical professional for further advice. This product is not a toy. Do not use this product for anything other than its intended use. Do not warm breastmilk or infant formula in a microwave oven as this may cause uneven heating and could scald the infant Do not forcefully squeeze or shake the pouch at any time.
Care Instructions
Before first use, disassemble and clean the product before placing silicone components in boiling water for 5 minutes to sterilise. Wash before and after each subsequent use. To clean the tubing, fill pouch with wann soapy water and connect the feeding tube as normal. Turn the pouch upside down and squeeze to let water flow through the tubing. Squeeze several times to flush through. Squeeze and roll tube between your fingers to ensure thorough cleaning. To rinse the tubing, fill pouch with drinking-quality water and connect the tube. Turn pouch upside down and squeeze the water through the tube. Repeat as necessary until clean. If any water is trapped inside the tubing after cleaning, drain the water from pouch, connect the tube then squeeze to flush it out. Clean tubing as soon as possible after feeding to prevent milk drying inside. It is important all residual moisture dries. To clean other parts of the product, although dishwasher safe, we recommend hand washing in wann soapy water, rinsing and drying thoroughly. To sterilise all parts (excluding flow controller), use a steam steriliser or boil in water for 2-3 minutes. DO NOT place the flow controller in boiling water or sterilisers. Do not use any bleach-based agents or sterilising tablets to clean this product. Do not use a UV steriliser to clean this product as it may impact its lifespan. Only soft bristle brushes or soft sponges should be used to clean this product, as hard scourers may scratch the surface. Store small parts in the dedicated storage box in a cool, dry place and avoid airect sunlight.
%20-%20Grey.webp)
.webp)
.webp)
.webp)
